What is the average size of a toilet?

Total height of one piece gravity toilet might vary from 21 to 30 3/4 inches (53 – 78 centimeters) with 14” – 16” (356 – 406 mm.) distance from the floor to bowl rim. Depth usually stays within 27” – 30” (686 – 762 mm) and width very rarely exceed 20 in (508 mm).

What is an elongated toilet seat?

An elongated bowl is approx. two inches longer than a round bowl. This results in a larger target area and less drip on the bowl, thus improving sanitary conditions. SIZE is important when you’re buying a flip toilet potty seat.

How far does a toilet have to be away from a wall?

Standard drywall is 1/2 inch thick, so the plumber should set the toilet flange at least 15-1/2 inches from the center of the flange to the wall framing. The standard distance from the back wall is 12 inches, or 12-1/2 inches from the center of the flange to the wall framing.

How much space do you need in front of a toilet?

Recommended: Plan a clear floor space of at least 30 inches from the front edge of all fixtures (lavatory, toilet, bidet, tub, and shower) to any opposite bath fixture, wall, or obstacle. Code Requirement: A minimum space of 21 inches must be planned in front of lavatory, toilet, bidet, and tub.

How big is the average toilet?

The depth can be as little as 14 inches (35 centimeters) and as much as 20 inches (50 centimeters). Toilets. You need at least 30 inches (76 centimeters) of clear width for toilets, but 32 to 36 inches (81 to 91 centimeters) is much better for most people.

What is the average size of a living room?

Closet space, on average, accounts for 146 square feet. Of the spaces in Table 2 that consist of a single area, separate family rooms are next to the great room in size, averaging 404 square feet, followed by living rooms (averaging 330 square feet), master bedrooms (309 square feet) and kitchens (306 square feet).

How tall is a tall toilet?

Today’s so-called “comfort height” or “right height” toilets feature bowls that are 17 to 19 inches high, as compared to the standard 15 inches of a regular toilet. The higher bowl height can be good for the knees and back and can offer real advantages to taller folks, the elderly and people with mobility problems.

How long is a roll of toilet paper?

The average measures of a modern roll of toilet paper is c. 10 cm (31516 in.) wide, and 12 cm (42332 in.) in diameter, and weighs about 227 grams (8 oz.). An alternative method of packing the sheets uses interleaved sheets in boxes, or in bulk for use in dispensers.

What is the standard size of a toilet?

Total height of one piece gravity toilet might vary from 21 to 30 3/4 inches (53 – 78 centimeters) with 14” – 16” (356 – 406 mm.) distance from the floor to bowl rim. Depth usually stays within 27” – 30” (686 – 762 mm) and width very rarely exceed 20 in (508 mm).

What is the rough in for a toilet?

Toilet Rough-In Measurements and Standards. Make sure the new toilet will fit your space. To do this, measure the rough-in size. This is the distance between the wall behind the toilet and the center of the drainpipe or the bolts that hold the toilet to the floor.

How high is a comfort height toilet?

Seat Height. Unlike standard bowls, whose rim stands about 14 or 15 inches above the floor, most “comfort height” toilets are 17 to 19 inches high. Some people find them more comfortable to use, as the added height makes it easier to get on and off the throne.

Who are Glacier Bay toilets made by?

Chris Deziel. The company that manufactures Glacier Bay toilet products, North American conglomerate Foremost Groups, doesn’t sell these products directly. It distributes them exclusively through Home Depot, which is where you should go if you need a brand-name replacement part for your Glacier Bay toilet.

What is the best flushing toilet on the market?

Best Flushing Toilet 2018: Editor’s Top Pick

  • WoodBridge T-0001, Dual Flush Elongated One Piece Toilet.
  • KOHLER 3810-0 Santa Rosa Comfort Height Elongated 1.28 GPF Toilet.
  • Dometic 320 Series Standard Height Toilet w/Hand Spray, Bone.
  • TOTO MS604114CEFG#01 Ultramax II Het Double Cyclone Elongated One Piece Toilet.
  • How big is a master bedroom?

    200 to 250 sq ft or if you want an idea of the dimensions 14×15, 15×15 or 15×16 That is just the average size. If you want to compete in todays market you need to go with about 350 square feet which would be around 20×17, 19×18, 20×18, 20×19, etc.

    What is the dual flush toilet?

    A dual-flush toilet is a variation of the flush toilet that uses two buttons or handles to flush different amounts of water. Although the first generation dual-flush toilet caught on, a redesign in 1993 cut water usage in half compared with traditional toilets, when used properly.

    What is the size of an average kitchen?

    70 square feet: In 2009, the National Kitchen and Bathroom Association defined a small kitchen as being smaller than 70 square feet and a big kitchen as being larger than this. 100 square feet: Given that the 10′ x 10′ kitchen is a standard benchmark for estimating kitchen remodel costs.

    How do you measure for a new toilet?

    To find out your toilet’s rough-in, measure from the wall behind the toilet to the middle of the closet bolts, which hold your toilet to the floor. That distance will likely be a bit more than the standard 10″, 12″, or 14″ rough-in dimensions. Round your measurement down to the nearest standard rough-in.

    How much does it cost to put in a toilet?

    A standard toilet install should take between one and two hours to complete and cost an average of $348 or less. Basic installs will run around $115. Unexpected costs could raise the cost up to as much as $800.

    Are all toilets a standard size?

    The standard distance is 12 inches, but 10 or 14 inches are occasionally found in older homes. Determine the rough-in in your bathroom by measuring from the wall behind the toilet to the middle of the bolts on the base, and compare to your desired toilet’s dimensions.

    Are toilet seats a standard size?

    For your reference, the standard measurement for US toilet seat bolts is 5.5 inches. Measure the width of the bowl at its widest point. If you have a round bowl, this dimension should be about 16.5 inches. If you have an elongated bowl, the measurement should be around 18 to 18.5 inches.

    Which is better round or elongated toilet?

    Most people find elongated toilet bowls to be more comfortable, but in a small bathroom, a round bowl can save space. Elongated toilet bowls measure up to 31″ from the wall, while round fixtures max out at 28″. Because round bowls are less expensive than elongated bowls, they save a few dollars, too.

    How high is Kohler Comfort Height?

    Toilet height is measured from the floor to the top of the seat. Heights vary enough to be noticeable. Most often, they fall somewhere between 15” and 19”, with standard toilets coming in under 17”. However, chair height toilets, what Kohler refers to as Comfort Height® toilets, measure 17” or more.