What is the ATX 12v power connector for?

Connects to the motherboard ATX 12V socket. Provides additional power to the CPU. Provides additional power to the CPU. 4+4 Pin ATX/EPS. A hybrid of the 4 PIN ATX12V and EPS 12V connectors that can be split in half or combined to accommodate either the EPS 12V Socket or the ATX 12V socket.

In this way, what does the ATX power supply do?

A power supply unit (or PSU) converts mains AC to low-voltage regulated DC power for the internal components of a computer. Modern personal computers universally use switched-mode power supplies. ATX power supplies are turned on and off by a signal from the motherboard.

What does ATX mean for a power supply?

ATX (Advanced Technology eXtended) is a motherboard configuration specification developed by Intel in 1995 to improve on previous de facto standards like the AT design. The most recent ATX12V power supply unit specification is 2.31, released in February 2008.

What is the function of a power connector on a motherboard?

Motherboard Power Connectors: AT/LPX And ATX. Every PC power supply has connectors that attach to the motherboard, providing power to the motherboard, processor, memory, chipset, integrated components (such as video, LAN, universal serial bus [USB], and FireWire), and any cards plugged into bus slots.

What is the meaning of ATX?

(Advanced Technology EXtended motherboard) The PC motherboard that superseded the Baby AT design. The ATX layout rotated the CPU and memory 90 degrees, allowing full-length expansions to be plugged into all sockets. The power supply blows air over the CPU rather than pulling air through the chassis.

What is a p4 power connector for?

The P4 connector is a 12V power supply cable used with motherboards that have an Intel Pentium 4 or later processor. As seen in the picture, the P4 cable has two black wires that serve as a ground and two yellow wires that are +12VDC and connect to a four pin connection on the motherboard.

What is the full meaning of ITX?

Updated: 04/26/2017 by Computer Hope. Short for Information Technology eXtended, ITX is a small motherboard form factor from VIA Technologies that was first introduced in November 2001 with the Mini-ITX.

Where is ATX located?

Official ATX Venues are all located in downtown Austin, TX. Festival headquarters are located at the Intercontinental Stephen F. Austin Hotel (701 Congress Ave.).

What is a ATX computer case?

PC cases themselves are often referred to by these three form factors, but the terms more accurately refer to the size of the motherboards they can host. ATX boards measure 12 by 9.6 inches, MicroATX up to 9.6 by 9.6 inches (they’re sometimes smaller), and Mini-ITX 6.7 inches square.

What does ITX stand for?

Definition of: ITX. ITX. (Information Technology EXtended) A family of very small PC motherboards from VIA Technologies. See PC motherboards.

What is a PCI e cord?

Extra wire just means more voltage drop. And if you’re using a peripheral connector to PCI Express adapter then be sure to plug each of the adapter’s peripheral connectors into a separate PSU cable. They gave you two peripheral connectors for a reason.

What is a micro ATX motherboard?

microATX (sometimes referred to as µATX, uATX or mATX) is a standard for motherboards that was introduced in December 1997. The maximum size of a microATX motherboard is 9.6 × 9.6 in (244 × 244 mm). The standard ATX size is 25% longer, at 12 × 9.6 in (305 × 244 mm).

What is a atx12v power supply?

Power Plugs. Nowadays, power supplies provide the following connectors to feed the components from the PC: Motherboards that use the 24-pin connector are called ATX12V 2.x, while motherboards that use the 20-pin connector can be either an ATX12V 1.x motherboard or an ATX motherboard.

What size is a mini ATX motherboard?

Mini ATX or Mini-ATX is a name used for various motherboard form factors, mainly a 15 × 15 cm (or 5.9 × 5.9 inches) size developed by AOpen Inc.. This Mini-ATX definition is slightly smaller than Mini-ITX.

What is a Molex connector for?

Molex is the name of the company who develops computer and other related connectors and products. This term is also known as the Molex power connector, which is the connector shown in the picture and is what connects your computer power supply to drives and devices inside the computer.

What is a NLX motherboard?

NLX is an industry-wide open specification for a space-saving computer motherboard . The NLX specification defines the motherboard size, hole mounting locations, riser card location, and maximum component heights on motherboard. A riser card is an expansion card that physically extends a slot for more expansion cards.

What is the form factor of a motherboard?

The form factor of a motherboard determines the specifications for its general shape and size. It also specifies what type of case and power supply will be supported, the placement of mounting holes, and the physical layout and organization of the board.

What is a Eatx?

Definition of: EATX. EATX. (Extended ATX) An ATX motherboard with an extended length of 13″ instead of 9.6″. See ATX motherboard and PC motherboards.

What is a mini motherboard?

Mini-ITX is a 17 × 17 cm (6.7 × 6.7 in) motherboard, developed by VIA Technologies in 2001. They are commonly used in small-configured computer systems. Mini-ITX boards can therefore often be used in cases designed for ATX, micro-ATX and other ATX variants if desired.

What is the difference between a micro ATX and ATX motherboard?

Micro ATX is one of the offshoots of ATX, and its main difference from the main ATX form factor is size. ATX retains a generally rectangular board size measuring 305mm. by 244mm. While ATX boards typically have five expansion slots, Micro ATX typically has three with four being the absolute maximum.

What are the advantages of ATX over micro ATX?

3) What advantages does ATX have over microATX? MicroATX is the advantage because of size that is usually much smaller than normal ATX and usually has fewer expansion slots like PCI, fewer DIMM sockets.

Can you put a micro ATX motherboard in a mid tower case?

Any standard ATX case will fit any standard ATX motherboard but dosn’t necessarily support Micro ATX or Mini ATX. It depends on the mid tower. I have a full tower and even though it’s easily big enough to fit them it dosn’t support Mini ATX, Flex ATX or EmbATX.

What size motherboard should I get for a mid tower?

Full-tower and mid-tower cases both fit standard ATX motherboards—by far the most common motherboard size out there. Both can also fit smaller micro-ATX motherboards. Exact sizing varies from case to case, but most mid-towers run up to roughly 18 inches high and 8 or so inches wide.

What is the motherboard and what does it do?

What does a Motherboard do? The Motherboard itself is a printed circuit board that allows the CPU, RAM, and all other computer hardware components to communicate with each other. There are huge variations in Motherboards from design, cases, power supply, size (Form Factor) and compatibility.