# What are the applications of a monostable multivibrator?

The monostable multivibrator is used as delay and timing circuits. It is also used for temporary memories. It is often used to trigger another pulse generator. It is used for regenerating old and worn out pulses.

Consequently, what is the use of bistable multivibrator?

The bistable multivibrator has two absolutely stable states. In other words a multivibrator which has both the state stable is called a bistable multivibrator. It is also called flip-flop, trigger circuit or binary. The output pulse is obtained when, and why a driving (triggering) pulse is applied to the input.

What is is a bistable circuit?

Flip-flops, also called bistable gates, are digital logic circuits that can be in one of two states. Flip-flops maintain their state indefinitely until an input pulse called a trigger is received.

How does an astable circuit work?

Astable Multivibrator (Oscillator) This circuit is an astable multivibrator, or oscillator. The two transistors are cross-coupled in such a way that the circuit switches back and forth between two states. In one state, the base of Q1 is about one diode drop above ground, allowing a base current to flow.

## What do you mean by linear wave shaping?

On the other hand when non-sinusoidal waveforms, (e.g. step, ramp, exponential) are applied to the input of such networks the output signal may have very little resembles with the input waveform. The action of a linear network in producing a waveform at its output different from its input is called linear wave shaping.

## What is meant by linear wave shaping?

When a sinusoidal signal is applied to either RC or RL circuits, the shape of the signal is preserved at the output, with a change in only the amplitude and the phase. The process by which the shape of a non-sinusoidal signal passed through a linear network is altered is called linear wave shaping.

## What is meant by non linear wave shaping?

Theory: The process where by the form of a sinusoidal signals are going to be altered by transmitting through a non-linear network is called non-linear wave shaping. Non-linear elements (like diodes, transistors) in combination with resistors can function as clipper circuit.

## What is the clipper circuit?

In electronics, a clipper is a device designed to prevent the output of a circuit from exceeding a predetermined voltage level without distorting the remaining part of the applied waveform. Clipping circuits are also called slicers or amplitude selectors.

## What is the main difference between linear and nonlinear circuit?

A nonlinear circuit is an electric circuit whose parameters are varied with respect to Current and Voltage. In other words, an electric circuit in which circuit parameters (Resistance, inductance, capacitance, waveform, frequency etc) is not constant, is called Non Linear Circuit.

## Is the superposition theorem applicable to non linear network Why?

The requisite of linearity means that Superposition Theorem is only applicable for determining voltage and current, not power!!! Power dissipations, being nonlinear functions, do not algebraically add to an accurate total when only one source is considered at a time.

## What is a nonlinear circuit?

In an electric circuit, a nonlinear element or nonlinear device is an electrical element which does not have a linear relationship between current and voltage. A diode is a simple example. Examples of linear elements are resistors, capacitors, and air core inductors.

## What is the Thevenin theorem?

Thevenin’s Theorem. Any combination of batteries and resistances with two terminals can be replaced by a single voltage source e and a single series resistor r. The value of e is the open circuit voltage at the terminals, and the value of r is e divided by the current with the terminals short circuited.

## What is the difference between active and passive networks?

An active network is a network that contains an active source – either a voltage source or current source. A passive network is a network that does not contain an active source. Active elements can inject power to the circuit, provide power gain, and control the current flow within the circuit.

## What is the meaning of active network?

An active network is a network in which the nodes are programmed to perform custom operations on the messages that pass through the node. For example, a node could be programmed or customized to handle packets on an individual user basis or to handle multicast packets differently than other packets.

## What is the meaning of active components?

An active component is a device that has an analog electronic filter with the ability to amplify a signal or produce a power gain. There are two types of active components: electron tubes and semiconductors or solid-state devices. A typical active component would be an oscillator, transistor or integrated circuit.

## Which are active components?

Active components include amplifying components such as transistors, triode vacuum tubes (valves), and tunnel diodes. Passive components can’t introduce net energy into the circuit. They also can’t rely on a source of power, except for what is available from the (AC) circuit they are connected to.

## Is capacitor active or passive?

In order for a circuit to be properly called electronic, it must contain at least one active device. Components incapable of controlling current by means of another electrical signal are called passive devices. Resistors, capacitors, inductors, transformers, and even diodes are all considered passive devices.

## Is a diode active or passive?

In order for a circuit to be properly called electronic, it must contain at least one active device. Components incapable of controlling current by means of another electrical signal are called passive devices. Resistors, capacitors, inductors, transformers, and even diodes are all considered passive devices.

## What is the difference between active and passive components?

Components that cannot provide any power gain to the circuit are called passive devices. These devices are incapable of controlling the current (energy) flow in the circuit and need the help of active devices to operate. Some examples for passive devices are resistors, inductors and capacitors.

## What is an active element?

A passive element is an electrical component that does not generate power, but instead dissipates, stores, and/or releases it. Passive elements include resistances, capacitors, and coils (also called inductors). These components are labeled in circuit diagrams as Rs, Cs and Ls, respectively.

## What are active and passive components?

In order for a circuit to be properly called electronic, it must contain at least one active device. Components incapable of controlling current by means of another electrical signal are called passive devices. Resistors, capacitors, inductors, transformers, and even diodes are all considered passive devices.

## What are the main components of a circuit?

These are the most common components:

• Resistors.
• Capacitors.
• LEDs.
• Transistors.
• Inductors.
• Integrated Circuits.
• ## What are the most common electronic components?

Electronic Component Guide – The Most Common Components

• Resistor.
• Capacitor.
• Diode.
• Transistor.
• Integrated Circuit (IC)
• Relay.
• Inductor.
• Crystal.
• ## What is is a bistable circuit?

Flip-flops, also called bistable gates, are digital logic circuits that can be in one of two states. Flip-flops maintain their state indefinitely until an input pulse called a trigger is received.